Specification of Inconel 718 Wire
| Standard | ASTM B805 / ASME SB805 |
|---|---|
| Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | Cut Lengths: 0.125″ to 72″ No Limit on Spooled Lengths |
| Diameter | 0.0004″ to 0.040″ 10 microns to 1.0 mm Other Sizes on Request |
| Wire Density | 8.89 g/cm3 |
| Ultimate Strength (≥ MPa) | 580-750 |
| Wire Resistance (μΩ.m) | as standard |
| Wire Elongation (≥ %) | 28-30 |
| Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| Welded Wire Mesh | Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch Roll Length: 100feet or 150feet |
| Wire Mesh Weaving Methods | plain weave, twill weave, dutch weave |
| Technique | Cold Rolled, Hot Rolled |
| Condition | M, Y, 1/2Hard |
| Offered in a Wide Range of Packages Including | Spool Reel Coil Bobbin Carrier Custom packaging provided from as low as 1lb to 200lb tapered plastics |
| Form | Filler Wire, Flat Wire, Coil Wire, Electrode Wire, Welding Wire, Filter Mesh, MIG Wire, TIG Wire, Spring Wire, Stranded and Twisted Wire |
Inconel 718 Wire Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 718 | 2.4668 | No7718 | NCF 718 | – | – | – | – |
Chemical Composition Of Inconel 718 Wire
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.30 max | 0.15 max | 17.0–21.0 | – | 50.0–55.0 | – |
Inconel 718 Wire Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.2 g/cm³ | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45% |
There are no reviews yet.