Specification of Inconel 625 Wire
| Standard | ASTM B446, ASTM B443, ASTM B829, AMS 5879, AMS 5666, UNS N06626 |
|---|---|
| Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | Cut Lengths: 0.125″ to 72″ No Limit on Spooled Lengths |
| Diameter | 0.0004″ to 0.040″ 10 microns to 1.0 mm Other Sizes on Request |
| Wire Density | 8.44 g/cm³ |
| Ultimate Strength (≥ MPa) | 827 MPa (120 ksi) |
| Yield Strength (0.2% Offset) | 414 MPa (60 ksi) |
| Wire Elongation (≥ %) | 30–35% |
| Surface | Bright, Smooth, Oxide-Free, Polished, PTFE Coated |
| Tempers | Annealed, 1/4 Hard, 1/2 Hard, Spring Temper |
| Welded Wire Mesh | Roll Width: 24″, 36″, 48″, 72″ Roll Length: 100ft, 150ft |
| Wire Mesh Weaving Methods | Plain Weave, Twill Weave, Dutch Weave |
| Technique | Cold Drawn, Annealed, Hot Rolled |
| Condition | M, Y, 1/2 Hard, LCF-optimized |
| Offered in a wide range of packages including | Spool Reel Coil Bobbin Carrier Custom packaging (1lb to 200lb) |
| Form | Filler Wire, Welding Wire (MIG/TIG), Electrode Wire, Flat Wire, Spring Wire, Stranded Wire |
Inconel 625 Wire Equivalent Grades
| Standard | Werkstoff Nr. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
Chemical Composition Of Inconel 625 Wire
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| Inconel 625 | 0.10 max | 0.50 max | 0.50 max | – | 0.15 min | 20.0–23.0 | 5.0 max | 58.0 min | – |
Inconel 625 Wire Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|
| 8.4 g/cm³ | 1,350 °C (2,460 °F) | Psi – 135,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
There are no reviews yet.