Specification of Inconel 600 Wire
| Standard | ASTM B166, ASME SB166 |
|---|---|
| Dimensions | ANSI/AWCI – 01 -1992, ASTM E 2016-11, RRW 360 |
| Length | Cut Lengths: 0.125″ to 72″ No Limit on Spooled Lengths |
| Diameter | 0.0004″ to 0.040″ 10 microns to 1.0 mm Other Sizes on Request |
| Wire Density | 8.89 g/cm³ |
| Ultimate Strength (≥ MPa) | 580 – 750 |
| Wire Resistance (μΩ.m) | As standard |
| Wire Elongation (≥ %) | 28 – 30 |
| Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Tempers | Dead soft annealed to ultra spring temper |
| Welded Wire Mesh | Roll Width: 24″, 36″, 1m, 48″, 72″, or 84″ Roll Length: 100ft or 150ft |
| Wire Mesh Weaving Methods | Plain weave, Twill weave, Dutch weave |
| Technique | Cold Rolled, Hot Rolled |
| Condition | M, Y, 1/2 Hard |
| Packages | Spool, Reel, Coil, Bobbin, Carrier Custom packaging from 1 lb to 200 lb tapered plastics |
| Form | Filler Wire, Flat Wire, Coil Wire, Electrode Wire, Welding Wire, Filter Mesh, MIG Wire, TIG Wire, Spring Wire, Stranded and Twisted Wire |
Inconel 600 Wire Equivalent Grades
| Standard | Werkstoff Nr. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Chemical Composition Of Inconel 600 Wire
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
|---|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.50 max | 0.015 max | 14.00 – 17.00 | 6.00 – 10.00 | 72.00 min | – |
Inconel 600 Wire Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|---|---|---|
| Inconel 600 | 8.47 g/cm³ | 1413 °C (2580 °F) | 95,000 Psi (655 MPa) | 45,000 Psi (310 MPa) | 40 % |
There are no reviews yet.