Specification of Inconel 925 Round Bar
| Specifications | ASTM B805 / ASME SB805 |
|---|---|
| Dimension Standard | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Bar Diameter | 0.1 mm to 100 mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm. Width: 10 to 500mm. |
| Square bar size | 4 to 100mm |
| Rectangular Bars | Size: 33 x 30mm to 295 x 1066mm. Thickness: 3.0 to 12.0mm. |
| Hollow Bars | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2 to 495mm Diameter |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients requirements |
| Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Bars Condition | Hardened & tempered, annealed |
| Cold Rolled Bar Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
Inconel 925 Round Bar Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
|---|---|---|
| Inconel 925 | – | N09925 |
Chemical Composition Of Inconel 925 Round Bar
| Grade | C | Mo | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|
| Inconel 925 | 0.01 max | 3 max | 0.5 max | 0.03 max | 1.8 | 28 | 44 | 21 | 0.3 | 2.1 |
Inconel 925 Round Bar Mechanical Properties
| Yield Strength RP0.2, MPa |
Tensile Strength RM, MPa |
Elongation [%] |
Hardness [HRC] |
Impact, Charpy-V, -60ºC [J] |
|---|---|---|---|---|
| ≥ 758 | ≥ 965 | ≥ 25 | ≤ 38 | ≥ 47 |
| ≥ 296 MPa – ≥ 43000 psi | ≥ 648 MPa – ≥ 94000 psi | ≥ 35 % | – | ≥ 47 |
There are no reviews yet.