Specification of Inconel X750 Plate
| Standards : | AMS 5542 |
| Dimensions : | ASTM, ASME, and API |
| Plates
Thickness : |
Range from .008″ to .0125″ |
| Shims Thickness : | Range from .01″ to .0125″ |
| Plates Thickness : | Ranges from .0125″ to 5.00″ |
| Plates Width : | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Plates Length : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Tempers : | Annealed, 1/4, 1/2 Hard, 3/4 Hard, Full Hard |
| Hardness : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Value Added Service : | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Inconel X750 Plate Equivalent Grades
| STANDARD | UNS | WNR. |
|---|---|---|
| Inconel X-750 | N07750 | 2.4669 |
Chemical Composition Of Inconel X750 Plate
| Al | C | Cr | Co | Cu | Fe | Mn | Nb | Ni | Ti | S | Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 0.40-1.0 | 0.08 max | 14.0-17.0 | 1.00 max | 0.50 max | 5.0-9.0 | 1.00 max | 0.70-1.20 | 70.0 min | 2.25-2.75 | 0.01 max | 0.50 max |
Inconel X750 Plate Mechanical Properties
| Tensile Strength | Yield Strength (0.2% Offset) | Elongation |
|---|---|---|
| 1250 MPa, 181000 psi | 850 MPa, 123000 psi | 30 % |
There are no reviews yet.