Specification of Inconel 600 Plate
| Specification | ASTM B168 / ASME SB168 |
|---|---|
| Sizes | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | 0.1mm to 100 mm |
| Width | 10-2500mm |
| Length | 2m, 2.44m, 3m, or as required |
| Finish | Hot rolled plate (HR), Cold rolled Plate (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Stock in form of | Plate, Coils, Foils, Rolls, Strip, Flats, Clad Plate, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Inconel 600 Profiling | To provide a full profiling service we use numerous profiling methods including: • Laser Plate Cutting • Plasma Plate Cutting • Oxy-propane Flame Cutting |
Inconel 600 Plate Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Chemical Composition Of Inconel 600 Plate
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
|---|---|---|---|---|---|---|---|---|
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel 600 Plate Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|---|
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95000 , MPa – 655 | Psi – 45000 , MPa – 310 | 40% |
There are no reviews yet.