Nimonic 105 round bars suppliers in India.
We are Nimonic 105 round bars suppliers in India.NIMONIC® alloy 105 (W. Nr. 2.4634) is a wrought nickel-cobalt-chromium-base alloy strengthened by additions of molybdenum, aluminum and titanium. It combines the high strength of the age-hardening nickel-base alloys with good creep resistance.
You can more learn from below nimonic 105 composition. We also have nimonic 105 flat bars, nimonic 105 sheets, nimonic 105 rod , nimonic 105 wires, nimonic 105 Welding rods etc.
Understanding the standard specifications of Nimonic 105 Round Bar is essential for any professional working in industry. This Table provides an overview of the different standards and sizes when it comes to Nimonic 105 Round Bar stock.
• Aerospace
• Power Generation
• Petrochemicals
• Pharmaceuticals
• Chemical Equipment
• Pipeline Engineering
• Marine Industry
• Chemical Industry
• Oil & gas industry
• Mechanical Engineering
• Plant Engineering
• BS HR3
• UNS N13021
• DIN 2.4634
• ASTM C565
• WS 2.4634
• MSRR 7017
• MSRR 7018
• Nimonic 105
• UNS N07090
• Werkstoff Nr. 2.4632
• Werkstoff Br. 2.4969
• NiCr20Co18Ti
• NCK20TA (AIR 9165)
• BS HR2
• AMS 5829
• MSRR 7137, MSRR 7017
• Good Resistant to corrosion.
• Resistant to high heat temperatures.
• Used for high temperature static applications.
• Oxidation resistant at high temperatures.
• excellent resistance in oxidizing environments up to 1000 °C.
• good mechanical properties at high temperatures.
We provide you with a variety of product forms, including but not limited to
• Nimonic 105 round bars
• Nimonic 105 Square bars
• Nimonic 105 Flat bars
• Nimonic 105 Circle
• Nimonic 105 Forged bars
• Nimonic 105 Rings
• Nimonic 105 Customize
• Nimonic 105 Cold Drawn Bars
• Nimonic 105 Hexagonal Bar
• Nimonic 105 Square Bars
• Nimonic 105 Polished Bar
• Nimonic 105 Rectangular Bar
Our Nimonic 80A round bars is carefully handled to minimize damage during storage and transportation and to preserve the quality of the product in its original condition.
Melting Point
(°C) |
Density | Modulus of Elasticity in Tension |
1290 – 1345 | 8.01g/cm3 | 188 GPa |
Alloy | Tensile Strength Minimum (psi) |
Yield Strength Minimum 0.2% offset (psi) |
% Elongation in 2″ Minimum |
105 | 167,000 | 112,000 | 25 |
Alloy | C | Si | Cu | Fe | Mn | Cr | Ti | Al | Co | Mo | Pb | S | B | Zr | Ni |
105 | 0.12 | 1.0 | 0.2 | 1.0 | 1.0 | 14.0-15.7 | 0.9-1.5 | 4.5-5.5 | 18.0-22.0 | 4.5-5.5 | 0.0015 | 0.010 | 0.003-0.010 | 0.15 | Bal |
Nimonic alloy 80A can be welded using common techniques, using a matching filler metal. A prerequisite for welding is that the metal should be solution treated. Fusion welding by tungsten inert gas welding and metal inert gas welding will be suitable for this alloy.
Nimonic 80A alloy can be heat treated at 1079°C (1975°F) for 8h and air cooled.
We provide you with a variety of product forms, including but not limited to
• Bar/Rod
• Pipe/Tube
• Coil/Strip
• Plate/Sheet/Circle
• Wire
• Fitting (Flange, Elbow, Tee, Reducer..)
• Customize
Click here to learn more about Nimonic 75, Nimonic 80A, Nimonic 90, Nimonic 105, Nimonic C263 Etc.
We also keep stock and supply all nickel alloys
Note: NIMONIC, INCONEL, and MONEL are trademarks of the Special Metals Corporation group of companies.