| Standard |
ASTM B408 / ASME SB408 |
| Dimensions |
ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Wire & Spool Length |
Cut Lengths: 0.125″ to 72″, No Limit on Spooled Lengths |
| Wire Diameter |
0.0004″ to 0.040″, 10 microns to 1.0 mm, Other Sizes on Request |
| Wire Density |
8.89 g/cm3 |
| Ultimate Strength (≥ MPa) |
580-750 |
| Wire Resistance (μΩ.m) |
as standard |
| Wire Elongation (≥ %) |
28-30 |
| Surface |
Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Tempers |
Tempers range from dead soft annealed to ultra spring temper |
| Wire Mesh |
Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch, Roll Length: 100feet or 150feet. |
| Weaving Methods |
plain weave, twill weave, dutch weave |
| Wire Condition |
M, Y, 1/2Hard |
| Packages Including |
Spool, Reel, Coil, Bobbin, Carrier, Custom packaging provided from as low as 1lb to 200lb tapered plastics |
| Test Certificates |
Wire Tensile Testing, 800 Wire Hardness Testing, Metallographic Inspection / Investigation, Corrosion Testing for Wire, Chemical Analysis for 800H Wire, Alloy Verification, 800HT Wire Wrap Testing, Wire Elevated Temperature Testing, Stress Rupture Testing (Creep) etc |
There are no reviews yet.