Largest Inventory
Customer Support
On Time Deliveries
ISO 9001 : 2015 Certified
Inconel Alloy 600 Wire Specification
| Inconel® Alloy 600 Wire Standard | ASTM B166 / ASME SB166 AMS 5514 |
|---|---|
| Inconel Alloy 600 / Wire Dimensions | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| 600 Inconel Wire Length | Cut Lengths: 0.125″ to 72″ No Limit on Spooled Lengths |
| 600 Inconel Wire Diameter | 0.0004″ to 0.040″ 10 microns to 1.0 mm Other Sizes on Request |
| Wire Density | 8.89 g/cm3 |
|
580-750 |
|
as standard |
|
28-30 |
| Surface | Polished bright, Smooth, Bare, Enamel, PTFE, Ceramic, Plated |
| Tempers | Tempers range from dead soft annealed to ultra spring temper |
| welded wire mesh | Roll Width: 24inch, 36inch, 1Metre, 48inch, 72inch, or 84inch Roll Length: 100feet or 150feet |
| wire mesh weaving methods | plain weave, twill weave, dutch weave |
| 600 Wire Technique | Cold Rolled, hot rolled |
| 600 Wire Condition | M, Y, 1/2Hard |
| Offered in a wide range of packages including: | Spool Reel Coil Bobbin Carrier Custom packaging provided from as low as 1lb to 200lb tapered plastics |
| Wire available in form of | Filler Wire, Flat Wire, Coil Wire, Electrode Wire, Welding Wire, Wire mesh, Knitted wire mesh, filter mesh, mig wire, tig wire, spring wire, stranded and twisted wire |
| Test Certificates | Wire Tensile Testing 600 Wire Hardness Testing Metallographic Inspection / Investigation Corrosion Testing for Wire Chemical Analysis for 316 Wire Alloy Verification 600 Wire Wrap Testing Wire Elevated Temperature Testing Stress Rupture Testing (Creep) |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Inconel 600 Wires Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Chemical Composition Of Inconel 600 Wires
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel Alloy 600 Wires Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
There are no reviews yet.